Product Features

YEY Model

YEY Model - Chain Conveyor

YEY Series Chain Conveyors are designed to use the conveyor in an inclined manner at all angles between 15° and 60° and to carry products. Thanks to its double-deck, intermediate partition and special pallet structure, the product carried on this conveyor can be taken from one place and transferred to a higher place.

Resmi Görüntüle
  • Daha Fazlası

    Drive Head

    Produced from Galvanized Steel, the drive head has a strong structure supported by special profiles.
    The drive head is driven both as a belt pulley and as a couple.
    Our drive motors are offered with different Hz and Voltage options according to demand.

    Close
  • More

    Wanderer Head

    Our idler heads, which are made of galvanized steel, do not create any accumulation on them with the cage type drum inside, and allow the chains to work properly. Chain tensioning settings are fast and practical.

    Close
  • More

    Till

    Our modular safes made of galvanized steel provide ease of maintenance and technical service.

    Close
  • More

    Chain

    Our chains, which are manufactured in different sizes according to their capacities, are of high strength and have successfully passed the tensile and breaking tests.

    Close
  • More

    Curved Case

    Made of galvanized steel 30° 45° Our inclined crates, produced with angles of 60° and 60°, easily carry the horizontal flow upwards.

    Close
Capacity:

YEY Series Conveyors have different models and product options with capacities ranging from 50 t/h (70 m³/h) to 300 t/h (390 m³/h).

Structural Feature:

YEY series conveyors are manufactured from galvanized sheet metal and are all bolted and nut-connected. It has a long service life. In order for your conveyors to last longer, optionally optional base and side surfaces can be reinforced with polyethylene sheets or non-corrosive steel plates.
The way these conveyors work is different from Y models. While the area used to transport grain is 80-85% in standard conveyors, it is around 40% in this type of conveyors. This results in a special capacity requirement and the use of a wider body. Grain-carrying pallets and their associated supports are different from standard conveyors. The motor power requirements of YEY model conveyors are higher than Y model conveyors of the same length and capacity. The power required in this type of conveyor can vary depending on many parameters.

Technicial Specifications

You can reach the capacity table of the product by clicking the letters in the picture.
  • Total Length
  • Intermediate Bodies
    1000 - 2000 ve 3000 mm
    in size
  • D
  • F
  • E
  • A
  • C
  • B
  • G
  • H
  • 5 ° - 10 ° Slope
YEY Model Capacity Charts
  • Format
    • Table Format
Swipe to see the rest of the table.
MODEL Capacity
(m³/h)
Capacity
(t/h)
C. Speed
(m/sn)
A
(mm)
B
(mm)
C
(mm)
D
(mm)
E
(mm)
F
(mm)
G
(mm)
H
(mm)
H
(mm)
ZKY-2024 35 25 0,45 200 240 280 1000 750 300 1000 45 65
ZKY-2624 70 50 0,65 260 240 340 1000 750 300
ZKY-2632 140 100 0,80 260 320 340 1000 750 300
ZKY-3238 200 150 0,70 320 380 400 1000 750 300
ZKY-3643 265 200 0,75 360 430 440 1000 750 300
ZKY-4046 330 250 0,75 400 460 480 1000 1000 300
ZKY-5358 400 300 0,55 530 580 610 1500 1500 300 1500 50 80
ZKY-6062 525 400 0,65 600 620 680 1500 1500 300
ZKY-7072 655 500 0,65 700 720 780 1500 1500 300
ZKY-8587 1045 700 0,70 850 870 930 1500 1500 300
ZKY-9090 1305 1000 0,70 900 900 980 1500 1500 300
Our Capacity Unit is m³/h. taken as.
Diameters found in the table are indicated as drum diameter.
Dimensions are given in mm.
Maxporter reserves the right to change the technical specifications.
The x distance between the Inlet and the Discharge chamber is variable according to the project.

Photos

This website uses cookies to provide you with a better service. See the Cookie Policy to change your cookie preferences and learn more about cookies. Please note that if you change the cookie settings, some features of the website may lose their functionality.