YEY Series Chain Conveyors are designed to use the conveyor in an inclined manner at all angles between 15° and 60° and to carry products. Thanks to its double-deck, intermediate partition and special pallet structure, the product carried on this conveyor can be taken from one place and transferred to a higher place.
Produced from Galvanized Steel, the drive head has a strong structure supported by special profiles.
The drive head is driven both as a belt pulley and as a couple.
Our drive motors are offered with different Hz and Voltage options according to demand.
Our idler heads, which are made of galvanized steel, do not create any accumulation on them with the cage type drum inside, and allow the chains to work properly. Chain tensioning settings are fast and practical.
Close
Our modular safes made of galvanized steel provide ease of maintenance and technical service.
Close
Our chains, which are manufactured in different sizes according to their capacities, are of high strength and have successfully passed the tensile and breaking tests.
Close
Made of galvanized steel 30° 45° Our inclined crates, produced with angles of 60° and 60°, easily carry the horizontal flow upwards.
CloseYEY Series Conveyors have different models and product options with capacities ranging from 50 t/h (70 m³/h) to 300 t/h (390 m³/h).
YEY series conveyors are manufactured from galvanized sheet metal and are all bolted and nut-connected. It has a long service life. In order for your conveyors to last longer, optionally optional base and side surfaces can be reinforced with polyethylene sheets or non-corrosive steel plates.
The way these conveyors work is different from Y models. While the area used to transport grain is 80-85% in standard conveyors, it is around 40% in this type of conveyors. This results in a special capacity requirement and the use of a wider body. Grain-carrying pallets and their associated supports are different from standard conveyors. The motor power requirements of YEY model conveyors are higher than Y model conveyors of the same length and capacity. The power required in this type of conveyor can vary depending on many parameters.
| MODEL | Capacity (m³/h) |
Capacity (t/h) |
C. Speed (m/sn) |
A (mm) |
B (mm) |
C (mm) |
D (mm) |
E (mm) |
F (mm) |
G (mm) |
H (mm) |
H (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZKY-2024 | 35 | 25 | 0,45 | 200 | 240 | 280 | 1000 | 750 | 300 | 1000 | 45 | 65 |
| ZKY-2624 | 70 | 50 | 0,65 | 260 | 240 | 340 | 1000 | 750 | 300 | |||
| ZKY-2632 | 140 | 100 | 0,80 | 260 | 320 | 340 | 1000 | 750 | 300 | |||
| ZKY-3238 | 200 | 150 | 0,70 | 320 | 380 | 400 | 1000 | 750 | 300 | |||
| ZKY-3643 | 265 | 200 | 0,75 | 360 | 430 | 440 | 1000 | 750 | 300 | |||
| ZKY-4046 | 330 | 250 | 0,75 | 400 | 460 | 480 | 1000 | 1000 | 300 | |||
| ZKY-5358 | 400 | 300 | 0,55 | 530 | 580 | 610 | 1500 | 1500 | 300 | 1500 | 50 | 80 |
| ZKY-6062 | 525 | 400 | 0,65 | 600 | 620 | 680 | 1500 | 1500 | 300 | |||
| ZKY-7072 | 655 | 500 | 0,65 | 700 | 720 | 780 | 1500 | 1500 | 300 | |||
| ZKY-8587 | 1045 | 700 | 0,70 | 850 | 870 | 930 | 1500 | 1500 | 300 | |||
| ZKY-9090 | 1305 | 1000 | 0,70 | 900 | 900 | 980 | 1500 | 1500 | 300 | |||
| Our Capacity Unit is m³/h. taken as. | ||||||||||||
| Diameters found in the table are indicated as drum diameter. | ||||||||||||
| Dimensions are given in mm. | ||||||||||||
| Maxporter reserves the right to change the technical specifications. | ||||||||||||
| The x distance between the Inlet and the Discharge chamber is variable according to the project. | ||||||||||||
